[MinnowBoard] How to add support for PCIe bridge to coreboot on Baytrial SoC

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

[MinnowBoard] How to add support for PCIe bridge to coreboot on Baytrial SoC

zahra rahimkhani
I Compiled Coreboot with Seabios and Tianocore payload on Baytrail SoC.
I want to use a [PCIe bridge][3] to convert a PCIE-x1 to 2 PCIE-X1 connectors
but booting FreeBSD won't show any active bridge.

The [Baytrail SoC documentation][1] states that a register called [SLCTL_SLSTS][2] should be
set in order to activate the bridge support but I don't know how to set such flag
on coreboot.

- Is it possible to use PCIe bridge on Baytrail SoCs?
- How one can add bridge support to coreboot if possible?

[1]: https://www.mouser.com/datasheet/2/612/atom-e3800-family-datasheet-1522396.pdf#3202
[2]: https://github.com/coreboot/coreboot/blob/master/src/soc/intel/baytrail/include/soc/pcie.h#L43
[3]: https://www.amazon.co.uk/IOCrest-Ports-Extension-Switch-Multiplier/dp/B075KNH1GM

_______________________________________________
elinux-MinnowBoard mailing list
[hidden email]
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard